A building that swings too hot or too cold costs you money in ways that show up everywhere. Customers cut their visits short, employees spend the afternoon complaining instead of working, inventory sits in conditions it was never meant to endure, and if it's a restaurant, the dining room empties while the kitchen keeps running. Then comes the part nobody enjoys: calling around and getting told the earliest opening is next Thursday. Luckily, Calderon HVAC and Plumbing Inc provides commercial HVAC services to business owners and property managers in and around Asheboro, NC, dispatching a technician as soon as possible.
Calderon HVAC and Plumbing Inc. operates out of Asheboro, NC, delivering heating, cooling, and plumbing solutions to commercial, industrial, and residential customers. Business properties account for a significant share of our workload, including repairs, equipment replacement, preventive maintenance programs, service agreements, and rooftop unit (RTU) service. New commercial installations, industrial systems, and tenant improvement projects round out what our team handles, backed by more than 15 years of experience in the trades.
The call usually comes in around the busiest part of the day. Half the building is uncomfortable, a rooftop unit (RTU) is either silent or making a noise nobody wants to hear, and the thermostat readout is drifting further from where it belongs by the minute. Sometimes only one zone goes down, which is almost worse because the failed space is inevitably the one with customers. Staff start propping doors open, someone drags in box fans, and the whole operation shifts into working around a problem instead of working.
Commercial equipment fails for reasons residential systems rarely encounter. Runtime is the big one, since rooftop units and commercial gear run far more hours than anything in a house, and components wear out accordingly. Belts stretch and snap, contactors pit and stick, capacitors weaken, and condenser coils pack with pollen and debris until the unit can't shed heat. Economizers built into rooftop units fail in the stuck position more often than most owners realize, either pulling in hot outside air all afternoon or refusing to use free cooling when the weather allows. Condensate systems clog and trip safety switches, refrigerant leaks develop at vibrating joints, and control boards go out. Deferred maintenance ties it all together, because a filter nobody changed for eight months starves the system and shortens the life of everything downstream.
Getting you back up starts with a technician who specifically understands commercial equipment. Our process includes checking controls and the thermostat schedule, testing electrical components under load, verifying refrigerant pressures, inspecting the economizer and its actuator, clearing condensate, and checking the curb and roof penetration while we're up there. Documenting what we find matters as much as the repair itself, since that record supports warranty claims, insurance questions, and eventually a sale of the building. Once the cause is identified, you get the repair options, the cost, and an honest read on whether that unit is worth continued investment or heading toward replacement. Reliable commercial HVAC service also means scheduling follow-up work around your operation rather than the other way around, whether that means early mornings, evenings, or Sundays.
The result is a building back to temperature, usually the same day, and a clearer picture of where your equipment stands. Owners who move onto a maintenance schedule after a failure typically stop having these conversations altogether, because filters, belts, coils, and controls get attention before they become emergencies. Predictable maintenance costs are far easier to budget than surprise repairs plus lost revenue, and every job we complete carries a one-year workmanship warranty.
We support business and industrial properties with practical HVAC solutions for repairs, planned care, equipment upgrades, construction, and changing facility needs.
Systems reaching the end of their service life get replaced with equipment sized for how the building actually operates today rather than how it operated 20 years ago. Scheduling, crane coordination, and phased work across multiple units all get planned around keeping your doors open.
Diagnosis comes before parts, because guessing on commercial equipment gets expensive quickly. Failed capacitors, contactors, belts, motors, control boards, economizers, and refrigerant leaks account for most of what our technicians find. You'll also get the findings, the options, and the pricing before anyone starts turning wrenches.
Some smaller warehouses, production facilities, and industrial spaces put demands on equipment that commercial gear was never built to meet. Our team handles service, repair, and replacement on these systems while working around production schedules and shift changes. Ventilation and makeup air requirements get evaluated as part of the job, since those often drive comfort complaints more than the equipment itself.
Ground-up builds and major renovations require mechanical systems designed for the space rather than adapted to it afterward. Load calculations, equipment selection, duct design, and control strategy all get worked out during planning. Growing out of a commercial contracting background, our team coordinates with other trades without creating bottlenecks on site.
Scheduled visits catch worn belts, dirty coils, drifting refrigerant charge, and clogged condensate lines while they're still minor line items. Quarterly service suits most buildings, though restaurants, medical offices, and high-filtration environments often move to monthly. Reviewing run schedules is part of every visit, since many buildings condition space at night, on weekends, and during holidays.
Rooftop equipment sits out of sight until the day it stops, and neglected units have a way of turning into roof leaks nobody connects back to the HVAC. Our technicians service, repair, and replace RTUs while checking the curb, drainage, and roof penetration during each visit. The economizer function is also verified because a stuck economizer quietly wastes energy for months.
Agreements bundle scheduled maintenance, priority response, and documented service history into a predictable annual cost. Property managers juggling several buildings appreciate having one point of contact rather than chasing down a different HVAC contractor for each location. Documentation also carries weight during warranty claims and when a property changes hands.
Buildouts and space reconfigurations often require ductwork changes, equipment relocations, additional zones, or entirely new units. Our crew works from the plans and coordinates with the general contractor to keep the mechanical scope on schedule. Getting the layout reviewed early prevents the need to redo finished work to satisfy an inspector later.
Refrigerant doesn't get used up the way gas in a car does, so a system that's low on charge leaks somewhere that needs to be found. Air conditioning services we provide include AC repair, installation, replacement, maintenance, tune-ups, and emergency calls for both residential and commercial customers.
Flipping the thermostat over to emergency heat during a cold snap feels like giving the system a boost. However, it actually bypasses your heat pump and runs the expensive backup instead. Heating services we provide include furnace and heat pump repair and installation, maintenance, and emergency repairs whenever you need them. Commercial properties, new construction, and boiler service round out what we take on.
Most manufacturers want new equipment registered within a couple of months of installation, and skipping that step can quietly cut your parts warranty in half. HVAC installation and replacement done through us covers residential and commercial systems, high-efficiency models, proper sizing, duct modifications, and smart thermostat installs.
Leaving the thermostat fan on "auto" means air is only filtered while the system is running, which isn't much on a mild day. The indoor air quality improvements we install include whole-home air cleaners, purification systems, UV lights, upgraded filtration, and dehumidifiers. Switching that fan setting is free, and we'll show you when it makes sense to use it.
Quite a few systems have manual dampers tucked into the duct runs that nobody has touched since installation day. Ductwork services we provide include duct installation, replacement, repair, sealing, airflow balancing, insulated systems, and commercial and new construction work. Adjusting dampers seasonally can push more air upstairs in summer and downstairs in winter without spending a dime on equipment.
Rubber washing machine hoses have a shelf life, and one letting go while you're at work can quickly flood the floor. Plumbing repairs we take care of include leak repair, damaged pipes, toilets, faucets, garbage disposals, and drain problems for homes and businesses. Braided stainless replacements cost very little and remove one of the more common flooding risks in a house.
Any water heater in an attic or upstairs closet needs a drain pan with a line running to a safe location, because a leak up there travels straight through the ceiling. Water heater services we offer include repair, replacement, maintenance, and new installation of tank and tankless units, gas or electric, residential or commercial. Homes on a closed system usually need an expansion tank too, and we'll check whether yours has one.
Those pipes sticking up through your roof let air into the drain system, and when leaves or a bird's nest block one, every drain in the house starts gurgling. Drain and sewer services we provide include drain cleaning, hydro jetting, camera inspections, clog removal, root intrusion work, sewer line repair, and sewer line replacement. Slow drainage with no clog to be found often traces back to venting rather than the line itself.
Copper connected directly to old galvanized pipe sets off a slow corrosion reaction right at the joint, which is why those spots tend to fail first. Repiping and water line services we handle include whole-home repiping, water line repair and replacement, pipe upgrades, commercial piping, and copper or cross-linked polyethylene (PEX) work. New construction plumbing is also built with compatible materials throughout to prevent problems.
Laying new tile over an existing bathroom floor raises the height enough that the toilet flange ends up sitting too low, and a rocking toilet or a slow leak follows. Plumbing installation and replacement services we offer include toilets, sinks, faucets, tubs, showers, fixtures, kitchen and bathroom remodels, and new construction plumbing. Flange extenders solve it easily when someone catches it before the toilet goes back down.
Commercial plumbing services we provide include repairs, preventive maintenance, plumbing replacements, tenant improvements, and service agreements for restaurants, offices, retail buildings, and other small commercial properties. Staying on top of that keeps your lines clear and your paperwork ready when someone asks for it.
Selecting a commercial HVAC company affects your bottom line, so here's what working with our team looks like.
Coverage runs 24 hours a day, every day of the year, because a failure during business hours can't wait for a Monday morning callback.
More than 15 years in the trades, including commercial contracting, means our crew understands buildings as complete systems and treats your operation with the respect it deserves.
Capital expenses on commercial equipment run high, and financing options help owners manage cash flow while getting the work done.
Detailed proposals arrive at no cost, giving you real numbers to take to ownership or a board without any obligation.
All leading commercial manufacturers are available through us, tailored to match your building's needs and budget.
Backing our labor with a one-year workmanship warranty keeps accountability where it belongs, on us.
Yes, mechanical permits apply to commercial equipment changeouts, new installations, and most significant ductwork alterations, with inspections following the work. Larger projects sometimes require engineered drawings to be submitted alongside the permit application. Licensed contractors handle that paperwork, and keeping it on file matters later for insurance claims, warranty coverage, and property sales.
Quarterly visits work well for most commercial buildings, since rooftop units and light commercial equipment run far more hours than anything in a house. Restaurants, medical offices, and businesses with heavy filtration needs often move to monthly service. Sticking to a schedule catches worn belts, dirty coils, and refrigerant issues while they're still small line items rather than emergencies.
For most property owners, yes, mainly because emergency repairs and unplanned downtime cost considerably more than scheduled maintenance does. Agreements typically include priority response, documented service records, and filter changes on a set schedule. That documentation also carries weight during warranty claims and when a building changes hands.
A thorough visit covers filter replacement, coil cleaning, belt and motor inspection, refrigerant pressure checks, tightening electrical connections, clearing condensate drains, and thermostat or control verification. Rooftop equipment gets an added look at the curb, drainage, and roof penetrations. Technicians also review run schedules, since many buildings are heating and cooling space at night and on weekends.
Long cooling seasons put heavy runtime on commercial equipment here, and summer humidity keeps condensate systems working overtime. Sun exposure and afternoon storms wear on cabinets, electrical components, and roof curbs faster than most owners expect. Pollen season adds another layer, clogging coils and filters within weeks.
FAQs reviewed by Filiberto Calderon, owner of Calderon HVAC and Plumbing Inc, an experienced and local HVAC contractor.
Contact Calderon HVAC and Plumbing Inc for a free estimate for repairs, replacement, or a maintenance program tailored to your building. We'll keep your space comfortable so you can focus on running the place.
Business Name: Calderon HVAC and Plumbing Inc
Address: Asheboro, NC, 27203
Phone: 336-964-3611
Business Hours: 24/7
24 Hour Emergency Service Available
Ask us about financing options
Contact us about available promotions
One-year workmanship warranty
